Excellence In Engineering Since 1949

Products Home | Cooling Equipment | Dummy Loads | Calorimeters | Hydraulic & Filtering Systems | Other Systems
Technology Info Home | Cooling Systems | Dummy Loads | Calorimeters | Formulas & Conversions
Industries & Customers Home | Industries
Sales & Support Home | Catalog | Cooling System Info. | Request Manual
Company Home | Company Facilities | Directions

CUW Series - Non-Refrigerated

small logo

CUW Series Non-Refrigerated Liquid To Liquid Heat Exchangers


Non-Refrigerated Heat Exchangers

Electro Impulse CUW series water-cooled, non-refrigerated units provide one of the most efficient and convenient types of cooling. Heat is dissipated from customer's liquid coolant to tap or facility water. Wide selection of coolant types in both primary (recirculating) and secondary (customer supplied, ultimate heat sink) coolant, including water, glycol/water solutions, PAO, fluorocarbons or other liquids. Use where coolant temperature control is less critical. Recirculating coolant temperature will be slightly above incoming tap or facility coolant temperature.

Liquid cooled units allow circulation of controlled, high purity water (or other coolants) in a closed loop, with high efficiency and low noise. Secondary coolant is automatically modulated by cooling system to conserve water and provide primary loop temperature control. Minimal heat is added to room ambient.

ELECTRO IMPULSE CUW series cooling units have extremely high heat transfer efficiency. As the graph below shows, our units provide lower coolant temperatures while using far less water than those of any known competitor. This is made possible by use of proprietary heat transfer arrangements which utilize compound flows, enhanced surface area and approach temperatures which are optimized by true counterflow arrangements.

Applications:

  • Lasers
  • X-ray machines
  • RF dummy loads
  • MRI
  • Radar Systems
  • Communications
  • Shipboard
  • Electronics
  • Military

  •  

    Model *Watts
    Removed
    GPM Primary
    Flow@ 50 PSID
    CUW-5,000
    5,000
    1.5
    CUW-10,000
    10,000
    4.0
    CUW-30,000
    30,000
    4.0
    CUW-50,000
    50,000
    8.0
    CUW-80,000
    80,000
    12.0
    CUW-100,000
    100,000
    15.0

    * All performance ratings are based on primary coolant being delivered at 20°F, or less, above temperature of secondary tap water.

    Capacities/Ranges are for water. Consult factory for other coolants. Table above represents typical values only. Consult factory for other flow rates, voltages, capabilities, etc. Specifications subject to change without notice.



    About Us | Site Map | Contact Us | ©2008 Electro Impulse, Inc.